Update:
Polymer cement waterproof coating, referred to as JS waterproof coating, J refers to polymer, S refers to cement, so JS...
Polymer cement waterproof coating, referred to as JS waterproof coating, J refers to polymer, S refers to cement, so JS is polymer cement waterproof coating. Polymer cement waterproof coating is an organic liquid material composed of polyacrylate emulsion, ethylene-vinyl acetate copolymer emulsion and other polymer emulsions and various additives.
Polymer cement waterproof coating is a two-component, water-based architectural waterproof coating made of inorganic fillers such as cement, quartz sand, light and heavy calcium carbonate and various additives through a reasonable ratio and composite. In construction engineering, JS-composite waterproof coating and cement polymer waterproof coating are the same material.
Precautions
The temperature of polymer cement waterproof coating must be higher than 5℃ during construction. It is not suitable for construction in rainy weather or when there is clear water in the base layer.
The waterproof coating film should be completely dried before surface decoration construction. The complete drying time is about 2 days, and the humid environment should be appropriately extended.
The yin and yang corners of the toilet and bath room are not arc-shaped. In areas with low temperature and dry air, polymer cement waterproof coating should be used.