Four application methods are currently used:
This method consists of:
The high pressure method is chosen for very high volume coating jobs. Formulators must prepare a lower viscosity coating at operating temperature to ensure a favorable flow of the fluid within the machine and a uniform thickness on the surface.
During initial surface preparation, oily contaminants and dirt must be removed by means such as abrasive sand blasting. Surfaces should be checked for cleanliness to ensure strong adhesion of the polyurea coating. This is a critical step to ensure the coating's durability.
In the mixing stage the prescribed pressure and temperature range must be maintained. Component dosing and mixing must be done with precision. The spray system must be designed to maintain pressure as well as temperature.
The formulated mixture is sprayed on the clean de-dusted surface. The first coat is produced directly on the surface. A second coat is applied to ensure a leak-proof barrier.
Machines used for polyurea spray coatings must be able to maintain temperatures up to 80°C (176°F) and pressure up to 210 bars.
This method is chosen when the volume of the spray coating job is medium and formulators are able to ensure a low viscosity of fluid mix below 60°C (140°F).
In the case of cold spray, formulators must ensure low viscosity at ambient temperatures to enable spray coating. This is a convenient method for small surface area jobs and repairs.
Roller or brush on methods are used when spraying is not feasible, such as a small pipe interior coating.
Amber Zhang Ms.
Foreign trade
Zhejiang Ruico Advanced Materials Co., Ltd. (Stock No.873233)
Add: No.188, Liangshan Road, Linghu Town, Nanxun District, Huzhou City, Zhejiang Province, China 313018
Phone: +86 (572) 2903236
Fax: +86 (572) 2905222
Wechat: 15534631339
Website: www.ruicoglobal.com
Email: [email protected]