peelable protective coating

peelable protective coating

Most bare metal will corrode if exposed to moisture and other environmental factors. That’s a given. Traditional paints for metal are designed for corrosion prevention to preserve the appearance and integrity of the surface. These paints adhere strongly to the metal, and this adhesion is vital to the corrosion protection they provide. Typical paints are designed to be difficult to remove, and to last.

But bare metal parts that are temporarily stored or transported during processing often require a coating that will protect against corrosion and be easily removed just prior to final assembly. Considering strict specifications of many OEMs and suppliers, corrosion is not an option.

But is it possible to provide the corrosion protection and durability of a paint with the limited adhesion of a temporary, peelable coating?

Product Performance
1. Water-based formula, non-toxic and odorless;
2. Non-heavy metal, halogen free, SGS, RoHs standard;
3. The protection period under natural environment can be more than two years;
4, can be used on the metal surface, paint surface, after the tear of the film body stripping without residual;
5, according to 10 silk coating thickness, 1 kg can be sprayed about 15-20 square meters;
6, labor cost saving, especially in the special-shaped material on both sides to save the cost of
raw materials;
7. Overcome the aging resistance of traditional lamination.
8. Shelf life of final film is above 24 months.